Abrasive Cloth Zirconia Alumina Sanding Belts For Chip Board Grinding
Quick Detail:
WEEM 3126 wide belts are built anti-static, Self-sharpening Zirconia gains, durable Y weight waterproof polyester backing.
Description:
WEEM 3126 anti-static, Self-sharpening Zirconia aluminum gains, durable Y weight waterproof polyester backing make into wide sanding belt for wide sander. It offers better grinding then Silicon Carbide and Aluminum Oxide sanding gain, and last longer.
Zirconia Alumina, ZA, is recognized by its blue color. A rugged synthetic abrasive that is best suited to stock removal applications. The heavy duty structure requires heavier pressure to break down the self-sharpening grains. It is ideal for heavy grinding on ferrous and non-ferrous metals and planning hard woods. This abrasive can last up to 5 times longer than aluminum oxide on tough applications.
A closed coat product has a higher number of abrasive cutting points per square inch and results in higher stock removal rate and longer time before the abrasive wears out. Normally results in a better finish.
A strong bi-direction tape splice is used. Joint of WEEM 3126 wide sanding belts offer 4 types of joints
Tap on gain line joint: 
as default.
Tap on gain zizag joint: 
Tap on butt line joint: 
Tap on butt zizag joint: 
Applications:
Woodworking /MDF/HDF/OSD/Partial board/Chip board
Specifications:
| Backing: | Y weight waterproof polyester |
| Treatments: | Anti-static |
| Coated: | Close coated |
| Bond: | Resin over resin |
| Grain: | Zirconia Alumina |
| Grit: | P36~P100 |
| Width: | 1000mm/39” ~ 1380mm/54” |
| Length: | Customer specific |
Competitive Advantage:
It is made for wide belt sander, such as: Steinemann, Imeas, Sofuma etc. Maintain economic sanding belts and good performance.
Product Tags:
|
|
Abrasive Cloth Zirconia Alumina Sanding Belts For Chip Board Grinding Images
|
